SIZE GUIDE
HOW TO MEASURE YOUR FEET
It is important to measure your feet (both feet) according to the instructions below WITHOUT ADDING EXTRA MILLIMETERS. Sizes will be chosen according to the measurements provided and the shoes will have the necessary extra space to fit well.
LENGTH AND WIDTH: We may have one foot bigger than the other and it usually doesn't make any difference, but if you find more than 3mm difference in length and/or width between both feet it is recommended to make a different size for each foot. In this case, write both measurements in the order.
REST OF MEASUREMENTS: In the case you find 5 millimeters difference or more between both feet when measuring the instep, ball of foot and/or ankle circumference, you should indicate both measurements in the order too.
ATTENTION:
Take both measurements, length and width, parallel to the sheet (as in the image). If you measure at angle, you will be adding extra millimeters and the shoes will probably be too big.
Follow the instructions below to take the correct measurement, and if you have any question, don't hesitate to ask by email (info@geasoles.com)
LENGTH
Gea Soles shoes are suitable for feet from 21.8cm to 29.7cm long.
You should measure the maximum length of your feet, from the heel to the longest toe, with a straight line perpendicular to the wall:
- You will need:
- 1- A paper
- 2- A pencil
- 3- A book
- 4- A rule or meter
1- Place a paper on the floor against the wall, and place your bare foot (no shoes or socks) on the paper.
Make sure your foot is perpendicular to the wall and the heel touches it slightly (not tightening).
2- Take a book and place it on the floor, parallel to the wall, touching it slightly with the longest toe of your foot.
3- Remove your foot carefully so you don’t move the paper or the book and mark with a pencil where the book is placed. The book should be parallel to the wall
4- Measure the distance from the mark to the wall. Make sure that you are measuring as straight as possible.
WIDTH
Measure your foot width horizontally across the ball of the foot, as in the image. You can use the same method used to measure the foot length (book-wall method).
Once you get your foot length and width, look for your foot length in the chart below and check the minimum and maximum recommended width.
In this chart you will find the foot width recommended for a good fit, but take into account that this chart is based on average measurements and it can vary depending on the foot morphology or the wearer preferences.
INSTEP CIRCUMFERENCE
Measure your instep circumference as in the image.
You can measure your instep circumference using a measuring tape, or if you don't have one, use a cord and measure the section with a meter or a rule after.
BALL OF FOOT CIRCUMFERENCE
Place the measuring tape (or the cord) across the big and little toe joints to measure the ball of foot circumference.
ANKLE CIRCUMFERENCE
In some models, you will be asked for your ankle circumference. You should measure it UNDER THE ANKLE BONES.
Place the measuring tape or the cord under both malleolus to measure the ankle circumference.
For any doubt or comment, feel free to ask by email INFO@GEASOLES.COM